Banjo Wheel Builder

$345.00 Base Price

As there are more than 1.5 BILLION possible component combinations it may take several seconds for it to load.

You will know it’s ready to start using as soon as an empty grey grip appearsto the left.

For more information about each option, click on the GREEN links below.

Please let us know if you have any comments, questions, or issues while designing Your Wheel Your Way.

 

All About Our Banjo Steering Wheels

●   Our Banjo style steering wheels have a 15″ outside diameter and feature chrome plated steel frames with a 3-bolt mounting pattern.

●   You can select from any of the STANDARD CHOICES for your wheel at no additional charge

●   As you are designing “Your Wheel Your Way” you can select any combination of OPTIONS & UPGRADES to create exactly the wheel you want.

●   For ideas and inspiration, go to our WHEEL GALLERY below to see Banjo wheels created by other customers using our Custom(er) Designed Steering Wheel System.

If there is anything else you want included in your wheel design, send an email to wheels@con2r.com describing what you envision and we’ll do our best to help you create it.

  • Start designing your wheel here:

    Our ABS grips take paint extremely well and when shot with a coat of clear they are extremely durable.

    If you want us to paint them for you, simply specify the PPG paint codes you want us to use while you are designing your wheel.

    If you prefer to doing your own painting, complete your wheel design showing the color splits you want and we will send you the grip parts cut and ready for paint. 


     

    Prices include painting the complete front grip, rear grip and spoke covers.  Standard materials included.  Additional material costs may apply.

    Complete your design using our standard colors and split choices.  We will use them only as a guide as to how to cut the parts for your wheel and then send the parts to you for painting.  We will assemble the wheel when the parts are returned to us.

     *

    The colors shown for our standard ABS grips are as accurate as possible but they are not exact due to the limitations of matching colors on computers.  If you want samples of our grip material to confirm colors, CLICK HERE.


    Wrapping a steering wheel requires that you send us a piece of leather measuring 6” X 60”.  We cannot use any “leather like” material.  The color shown on your wheel design is a place holder only.

    The typical charge for leather is $40 but the cost can vary depending on leather color and type.  This is separate from the charge for wrapping your steering wheel.

    You can select one of the representative colors from below to complete your wheel design and the final cost will be adjusted according to your leather choice.

    For the ultimate in grip comfort we offer a silicon rubber underlayment that goes over the steel frame in your steering wheel and under the leather.  The result is a unique combination of firm but still very “squeezable”.

    Choose from our 15 standard colors for your grip front section A.

    You can select sections to be custom painted and/or sections using our 15 standard colors.


    Choose from our 15 standard colors for your grip front.

    You can select one of the representative colors from below to complete your wheel design and the final cost will be adjusted according to your actual material costs if necessary.

     *

    We use PPG paint and match colors using their codes.  If you wish to provide us with custom mixed paint it must be supplied with a compatible clear coat.

    Choose from our 15 standard colors for your grip front Color B.

    You can select sections to be custom painted and/or sections using our 15 standard colors.


    Choose from our 15 standard colors for your grip front Color B.

    You can select one of the representative colors from below to complete your wheel design and the final cost will be adjusted according to your actual material costs if necessary.

     *

    We use PPG paint and match colors using their codes.  If you wish to provide us with custom mixed paint it must be supplied with a compatible clear coat.

    Custom species steering wheels require a minimum of wood, surfaced on two sides (S2S), measuring:

    •  4 pieces each 3 X 30 X true 3/4+
    - or -
    •  2 pieces each 6 X 30 X true 3/4+
    - or -
    •  1 piece at 9 X 36 X true 3/4+

    Additional material must be provided if the wood has knots or other flaws that must be cut around.

    A milling charge will be added if wood is warped, cupped or bowed.

    Unless otherwise instructed, we will use the most significant grain patterns for the front grip.

    Please indicate the species of wood you will be providing:

    Please note Color A and Color B positions as it will help you to indicate the color split for your wheel.

    Please note Color A and Color B positions as it will help you to indicate the color split for your wheel.

    Please note Color A and Color B positions as it will help you to indicate the color split for your wheel.

    Please note Color A and Color B positions as it will help you to indicate the color split for your wheel.

    Choose from our 15 standard colors for your rear grip.

    You can select sections to be custom painted and/or sections using our 15 standard colors.


    Choose from our 15 standard colors for your rear grip.

    You can select one of the representative colors from below to complete your wheel design and the final cost will be adjusted according to your actual material costs if necessary.

    We use PPG paint and match colors using their codes.  If you wish to provide us with custom mixed paint it must be supplied with a compatible clear coat.

     *


    Please select the grip section(s) you would like a "Soft Touch" finish applied on: 

     *

    Please select the grip section(s) you would like a "Soft Touch" finish applied on: 

    Please select the grip section(s) you would like a "Soft Touch" finish applied on: 

     *

    Please select the grip section(s) you would like a "Soft Touch" finish applied on: 


    We require “camera ready” art to etch your design.  You can load your file using the link below.  For best results, your artwork should be high contrast and in a vector (.eps, .ai, or .pdf) format, although we can use .jpg, .png, or .tif files as well.  The maximum image area is 2½” in diameter.

    • (max file size 32 MB)

    If you do not have a design ready to be etched on your horn button, please provide a short description of your desired design or use the Select Your File button above to send us a sketch.  Please note, we cannot provide you with “trademarked” art.

    We require “camera ready” art to laser your design.  You can load your file using the link below.  For best results, your artwork should be high contrast and in a vector (.eps, .ai, or .pdf) format, although we can use .jpg, .png, or .tif files as well.  The maximum image area is 2½” in diameter.

    • (max file size 32 MB)

    If you do not have a design ready to be lasered on your horn button, please provide a short description of your desired design or use the Select Your File button above to send us a sketch.  Please note, we cannot provide you with “trademarked” art.

    We require “camera ready” art to create your design.  You can load your file using the link below.  For best results, your artwork should be high contrast and in a vector (.eps, .ai, or .pdf) format, although we can use .jpg, .png, or .tif files as well.  The maximum image area is 2½” in diameter.

    • (max file size 32 MB)

    If you do not have a design ready to be placed on your horn button, please provide a short description of your desired design or use the Select Your File button above to send us a sketch.  Please note, we cannot provide you with “trademarked” art.

    We require “camera ready” art to create your design.  You can load your file using the link below.  For best results, your artwork should be high contrast and in a vector (.eps, .ai, or .pdf) format, although we can use .jpg, .png, or .tif files as well.  The maximum image area is 2” in diameter.

    • (max file size 32 MB)

    If you do not have a design ready to be placed on your horn button, please provide a short description of your desired design or use the Select Your File button above to send us a sketch.  Please note, we cannot provide you with “trademarked” art.


    Inlaid Emblem Guidelines

    •  The ideal size for an emblem is a 2½ - 2¾" diameter.

    •  There isn't a height restriction for an emblem, but the maximum depth for the recessed portion is 1/8”.

    •  A drawing of our horn button with dimensions can be found HERE.

    •  The cost of a custom inlay in a horn button can vary from $125-$200.  We will need a picture and/or a drawing with dimensions of your concept to be able to provide you with an accurate quote.

    Upload Photo:

    Use this window to send us a photo with dimensions or a drawing with dimensions of the emblem you want inlaid in your horn button.

    • (max file size 32 MB)

    If needed, please provide a description of your concept for your horn button:

    * These emblems are provided to us by third parties.  Prices are for the horn button with the emblem inlaid as shown.

  • IMPORTANT NOTE:  It is critical that you follow the manufacturer’s instructions as to how to install an adapter and how to mount a steering wheel to one of their columns.  If our bolt pattern does not match your adapter or column do not attempt to modify our wheel, the adapter or the column to try to make it fit.

    All of our steering wheels, with the exception of the C1 Corvette style, use what is commonly referred to as a “late GMC three-bolt mount.”  A drawing of this three-bolt mounting pattern can be found HERE.

    If your column does not have this mounting pattern you will need an adapter to be able to install your new CON2R wheel.

    You can find the adapter you need by clicking HERE.

    We stock the following adapters and can order others for you on request.

    Adapter Selection

Restart

0